Enclosure Plastic Bottom Ring - H Series - FAS050

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Enclosure Plastic Bottom Ring - H Series - FAS050The Enclosure Plastic Bottom Ring provides structural support and serves as the mounting base for the printer's feet. Installation Learn more about the Enclosure Plastic Bottom Ring on Bambu Lab Wiki. In the Box Enclosure Plastic Bottom Ring*1 Anti Vibration Feet*4 M3 21. 5 Screw*4 M3 6 Screw*4 BT2 5 Screw*6 Gasket*4 Shock absorbing foam *10 Front door silicone (to be attached to the bottom of the front door) *1 Compatibility H2 Series Product

A lower center of gravity and

0 or later

To achieve optimal printing performance

2mm Nozzle - Optimal Print Fineness

On the A1 and A1 Mini 45mm3/s is the maximum volumetric flow rate possible for a 0

P1S or X1E 0

we recommend using them for remote-controlled toy models

Ø240mm single-wall cylinder

There is next to no smell when printing and it is safe and environmentally friendly

5x5 screws*3

the filament spool should not slide down

AMS 2 Pro and AMS HT: 60°C for 12 hours